Gunsmith - Part 5 | ||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||
Gunsmith - Part 5 is a Quest in Escape from Tarkov.
Dialogue
| “ | I've said too much last time. It happens when I'm alone with my thoughts for a while. A lot of stuff slips through the head while I sit here calibrating the sights. That M4 turned out splendid, got taken off my hands in a moment. A bear dropped by recently, goes by the name of Sniper or something. He needs a sniper rifle Lobaev Saboteur, with a scope and multi-laser device. With recoil sum less than 400, ergonomics above 34, and weight below 6.6 kg. He said it needs to be a 2000m shot. The guy is serious, so do your best to make a solid build. | „ |
Requirements
- Must be Level 17 to start this quest.
Objectives
- Modify DVL-10 to comply with the required specification
Rewards
- +13,900 EXP
- Mechanic Rep +0.06
- 210,000 Roubles
| “ | Thanks, I will hand it to the Dim... Sniper | „ |
Guide
DVL-10 specifications:
- 34 or greater ergonomics
- 400 or less recoil
- 2,000 or greater sighting range (Nightforce ATACR 7-35x56 riflescope)
- 6.6 kg or less in weight
- A laser device (this can be any attachment with a laser, such as a flashlight/laser combo item, or a dedicated laser item).
Build
This is one example of many possible configurations.
Notes:
- This build is based on a standard DVL-10 from Skier LL4.
- You need to remove the magazine for this example build to work
| Icon | Attachment | Sold By | Loyalty Level |
|---|---|---|---|
|
X400 tactical flashlight | Peacekeeper | LL2 |
| 34mm one piece magmount made by I-E-A Mil Optics | Jaeger | LL3 | |
| Nightforce ATACR 7-35x56 riflescope | Jaeger | LL4 or Barter Item (LL2) |


