Gunsmith - Part 5 | ||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||
Gunsmith - Part 5 is a Quest in Escape from Tarkov.
Dialogue
| “ | I've said too much last time. It happens when I'm alone with my thoughts for a while. A lot of stuff slips through the head while I sit here calibrating the sights. That M4 turned out splendid, got taken off my hands in a moment. A bear dropped by recently, goes by the name of Sniper or something. He needs a sniper rifle Lobaev Saboteur, with a scope and multi-laser device. With recoil sum less than 400, ergonomics above 23, and weight below 6.6 kg. He said it needs to be a 2000m shot. The guy is serious, so do your best to make a solid build. | „ |
Requirements
- Must be level 17 to start this quest.
Objectives
- Modify DVL-10 to comply with the required specification
Rewards
- +13,900 EXP
- Mechanic Rep +0.06
- 200,000 Roubles
- 210,000 Roubles with Intelligence Center Level 1
- 230,000 Roubles with Intelligence Center Level 2
| “ | Thanks, I will hand it to the Dim... Sniper | „ |
Guide
DVL-10 specifications:
- 23 or greater ergonomics
- 400 or less recoil
- 2,000 or greater sighting range
- 6.6 kg or less in weight
- Any tactical device (such as the NcSTAR Tactical blue laser LAM-Module)
Build
This is one example of many possible configurations.
Notes:
- This build is based on a standard DVL-10 from Skier LL4.
- You need to remove the magazine for this build to work
- You can Replace the 34mm Mount listed below with the 34mm one piece magmount made by Nightforce available as a Barter from Jaeger LL2

